|
PRODUCT:
Odor×CideÔ
EZ5X is
designed for use in food service and food preparation facilities
where organic odors and organic accumulation are a problem. When
used as directed, this formulation will enzymatically clean hard
surface areas, inanimate surfaces such as floors, shower stalls,
stools, and drains. In addition, this formulation will deodorize
those areas that generally are hard to keep fresh smelling such
as garbage storage areas, empty garbage dumpsters and cans, rest
rooms, and other areas that are prone to odor caused by
microorganisms. Odor×CideÔEZ5X
is a special blend of enzymes, odor counteractants, and
fragrances. Odor×CideÔ
EZ5X will incrementally breakdown and remove organic
buildup on the surface or in the drain.
APPLICATIONS:
Cleaner, mildewstat, and deodorizer of any
waste system where decaying organics generate odor.
«
Meat Department
«Bakery/Deli
«Produce
Department
«Dumpster
«Garbage
Storage Areas
«Rest Room
«Empty
Garbage Cans
«Basements
DIRECTIONS FOR USE:
DRAIN ODOR CONTROL
-
Pour 60ml directly into drain. The frequency
of application depends upon organic accumulations in the drain
line. If there is just a small amount of odor-causing organics
in drain or P-trap one application may be sufficient. For heavy
organic accumulations, in the drain line, repeat daily until
drain runs free. NOTE: Odor×CideÔ
EZ5X should be used during the longest period of
non-use, generally at the close of the day.
SURFACE ODOR CONTROL
-
Pre-clean surface to be treated and
thoroughly saturate the area with Odor×CideÔ
EZ5X. Let stand wet for 15 minutes and wipe off with
a clean cloth or rinse with water. For very porous surfaces or
hard to clean areas, repeat daily until the surfaces are clean
and odor-free.
CLEANING -
Hold container 15 to 20 cm from surface to be
treated. Spray area until it is covered with the solution. Allow
product to penetrate and remain wet for 10 minutes. No scrubbing
is necessary. Wipe off with a clean cloth, mop or sponge. The
product will not leave grit or soap scum. For heavily soiled
area, remove gross soil before treatment.
MILDEWSTAT -
To control mold and mildew on pre-cleaned,
hard non-porous surfaces spray surface to be treated making sure
to wet completely. Let air dry. Repeat application at weekly
intervals or when mildew growth appears.
|
